Podiatry · Chiropractic · Orthopedics · Urgent care
Upgrade your X-ray to digital. Keep the generator you own.
We add an LG wireless detector, FDA-cleared X-Clever acquisition software, and a workstation to the X-ray you already have. Your generator, table, and console stay as they are. Try it in your practice free for two weeks.
No purchase obligation. Demo units are limited, so trials are scheduled in the order requests come in.
LG 14HQ701G-BP wireless detector
FDA 510(k) cleared · K221394
LG X-Clever acquisition software
FDA 510(k) cleared · K233599
What you keep, what we add
If your generator and table work, there is no reason to replace them.
You keep
- Your X-ray generator and control console
- Your table, bucky, and tube stand
- Your room and its shielding
- Your PACS, EHR, or reading service
We add
- LG 14 × 17 wireless flat-panel detector (drops into a standard 14 × 17 bucky tray)
- LG X-Clever acquisition software
- A preconfigured workstation
- Installation, calibration, DICOM setup, and staff training
Why it works with any generator: auto exposure detection
A conventional DR install wires the detector to the generator so the two can agree on when the exposure happens. The LG detector does not need that. It uses auto exposure detection (AED): the panel watches for X-rays itself and starts capturing the moment the beam arrives. Nothing on your generator is opened, modified, or connected.
You expose as usual
Set kV and mAs at your existing console and press the exposure switch, exactly as you do with film or CR. The generator never knows a detector is there.
The panel detects the beam
The detector keeps its sensor array in a ready state. When X-rays reach the panel, it senses the signal and begins integrating the image within the first milliseconds of the exposure.
Readout and transfer
When the exposure ends, the panel reads out the image and sends it to the workstation over wireless (802.11ac) or a cable. The image appears on screen moments after the exposure.
Processing and DICOM
X-Clever applies the processing for the selected anatomy and sends the study as standard DICOM to your PACS, EHR, or reading service.
What this means for your generator
There is no interface board, no generator modification, and no approved-brand list. If your generator can expose a film cassette or a CR plate today, it can expose the LG detector. Older single-phase units, high-frequency units, and portables all work the same way, because the detector is not talking to the generator at all.
What the photos are for
We ask for photos of your generator label, console, and room to plan the installation: bucky tray fit, where the workstation goes, and network setup. They are for planning the install, not for a compatibility check.
$12,900 installed, and exactly what it covers
Plus applicable sales tax. Anything beyond a standard installation is quoted in writing before any work begins.
Included
- LG 14 × 17 wireless flat-panel detector
- LG X-Clever acquisition software
- Preconfigured workstation PC
- DICOM send and worklist with your existing PACS or EHR
- Standard installation and staff training
- Documentation support for state X-ray registration
Velion Cloud PACS is a veterinary product and is not included. Your images go to the PACS, EHR, or reading service you already use.
Quoted separately, in writing
- Wall or arm mounting, depending on your room
- Additional workstations
- Electrical or network cabling work
- Generator repair or replacement parts
- Travel outside Southern California
A 17 × 17 detector is available on request.
Nothing to buy until you have seen it in your practice
Send us the basics
Your specialty, location, and current X-ray setup. We plan the install from a few photos.
Two weeks, free
We install a demo unit so your providers judge the images on your own patients. No purchase obligation.
Keep it, installed in 1–2 days
If you decide to buy, we complete installation, DICOM setup, and staff training.
Built for independent practices
Podiatry
Foot and ankle views in the exam room, on a 14 × 17 detector.
Chiropractic
Replace film or CR processing. Measurement tools include Cobb angle.
Orthopedics
Upgrade a second room or an older CR setup without replacing the X-ray.
Urgent care
Images in seconds, sent to the PACS or reading service you already use.
Cleared for general radiography. Not for mammography, dental, fluoroscopic, or angiographic imaging. Full-spine stitching is not part of the standard package.
Questions
Will it work with my X-ray generator?
Yes. The LG detector uses auto exposure detection (AED): it senses the X-ray beam itself and is not wired to the generator. Brand, age, and type do not matter. If your generator can expose film or a CR cassette today, it can expose the LG detector.
Does anything get connected to or changed on my generator?
No. The generator, console, tube, and wiring stay exactly as they are. The detector, software, and workstation are added alongside them.
Is the system FDA cleared?
Yes. The LG 14HQ701G-BP detector is FDA 510(k) cleared (K221394) and the LG X-Clever acquisition software is FDA 510(k) cleared (K233599) for general radiography. It is not for mammography, dental, fluoroscopic, or angiographic imaging.
Will it work with the PACS or EHR we already use?
Yes. The software sends standard DICOM to your existing PACS or reading service and supports DICOM worklist. You keep the systems you already use. Velion Cloud PACS is offered to veterinary practices only and is not part of the medical retrofit.
Can we try it before buying?
Yes. We install a demo unit in your practice for two weeks at no cost and with no purchase obligation. Demo units are limited, so trials are scheduled in the order requests come in.
What is included for $12,900?
An LG 14 × 17 wireless flat-panel detector, LG X-Clever acquisition software, a preconfigured workstation, DICOM send and worklist setup, standard installation, staff training, and documentation support for state X-ray registration. Plus applicable sales tax.
What is quoted separately?
Wall or arm mounting, additional workstations, electrical or network cabling work, generator repair, and travel outside our service area. Anything beyond a standard installation is quoted in writing before work begins.
Request a 2-week trial
Share the basics. We will follow up about availability.
Request a trial
Mention your specialty and current X-ray setup (film, CR, or DR) in the message.
Prefer email? Write to eric@velionxray.com.